Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

0

CUPS AND STICKS

Perfect for handing out promotional balloons and use at children's parties.
Simply fill your balloon with air. Wrap the neck of the balloon around the cup part
( no need to knot the balloon - full instructions enclosed with order) and then push the stick into the cup.
Suitable for latex balloons from size 10 to 12 inches.
Sticks measure 38cm (15 inches) long .



0

CURLING RIBBON

5mm wide by 500 metres long.
Ideal for use with gas or air filled balloons . The loose ends can be curled into ringlets by pressing and dragging over the blunt side of a scissors.

0

ZF4 SEALS WITH 1.15m RIBBON

These are an alternative to balloon valves and offer quite a few advantages

1. They are much lighter than a valve which gives a longer balloon float time.
2. They do not need to be pre-fitted to the balloon.
3. There are no internal moving parts and they make a tighter seal than a valve, improving gas retention.
4. They are smaller and neater looking on the inflated balloon.
5. They are cheaper that a balloon valve
6. Suitable for use with 10" to 12" latex balloons
7. Balloons can be re-inflated or seals can be re-used.
8. Can be used with either helium gas or air.


The seal ribbon is put around the outside of the filled balloon. You then grip the seal disc and pull both end of the ribbon so that the balloon neck is doubled over and pulled back through the disc.
Not suitable for foil balloons.



0

BALLOON VALVES with 1.2 m ribbon

We will supply these pre-fitted to your balloons so that filling will be quick and easy for you.

1.2 metres of ribbon is securely attached to the valve.

Suitable for use with 10" to 12" latex balloons

Balloons can be re-inflated or valves can be re-used.

To use, fill balloon with gas through the valve filling tube Not suitable for foil balloons.

0

BALLOON AIR PUMP

This is a rugged, high quality "Faster Blaster" balloon pump. The pump pushes air out on both the push and pull strokes, so speeding up balloon inflation.

0

BALLOON WEIGHT BOXES

Supplied flat packed. Easy to assemble. Just add a small weight to each box (such as a few pebbles) and then they will hold down a bunch of balloons to make a great table display.

0

DISPOSABLE HELIUM GAS TANK

Large size Cylinder .
Great at Parties, Weddings etc.
It's so easy to get really professional looking results.
Full safety and cylinder disposal instructions are on the box.
Cylinder will fill 50 latex balloons to 9 inches diameter or 25 balloons to 11 inches or 25, 18 inch foil balloons.

You should gas fill latex balloons on the day of use. If you inflate a 10 inch balloon to 9 inches diameter, it should float for 6-12 hours. Larger balloons will float for a longer time. Foil balloons should float from 3-7 days.